122CM FURNITURE CABINET DOOR STICKER WALLPAPER WATERPROOF SELF ADHESIVE, PELEKAT PERABUT DINDING PINTU KALIS AIR
- Regular price
- RM 28.80
- Regular price
-
RM 0.00 - Sale price
- RM 28.80
Share
***LOCAL SELLER with READY STOCK ***
> DIY self adhesive DECORATION sticker for all type of furniture board, kitchen cabinet, door and other.
> Benefits & features;-
a- Resurface and refurbish to get a new decoration with using existing furniture.
b- Water proof, moisture proof & easy to clean.
c- Material: Environmental friendly Vinyl.
d- Quick & easy lamination with measurement cutting point release paper.
> Size: Option(a) 122CM x 2M(length) [1 unit = 2M ].
> Size: Option(b) 122CM x 3M(length) [1 unit = 3M ].
> Size: Option(c) 122CM x 5M(length) [1 unit = 5M ].
No cutting joint if order quantity above 5M length.
Example: order 10M then 10M continuous length in a single roll packing.
> Direction to use:
1- Surface must be clean and free from all dirt, dust, grease & oil.
2- Apply filler if surface found hole, crack, scratch or any damage.
3- Measure and cut the target surface size.
4- Tear off the release paper on the other side of the sticker and slowly attach on the target surface.
5- Using a scraper to remove the bubble in order the sticker is fully attached with flat surface.
6- Using a trimmer or cutter to trim the extra film on the edge to get your target size.
7- Do leave it at least 12hr upon installation completed.
Note:
1- Pls allow 3-5mm tolerance due to manual measurement.
2- Colour may vary different from the actual picture.
> DIY self adhesive DECORATION sticker for all type of furniture board, kitchen cabinet, door and other.
> Benefits & features;-
a- Resurface and refurbish to get a new decoration with using existing furniture.
b- Water proof, moisture proof & easy to clean.
c- Material: Environmental friendly Vinyl.
d- Quick & easy lamination with measurement cutting point release paper.
> Size: Option(a) 122CM x 2M(length) [1 unit = 2M ].
> Size: Option(b) 122CM x 3M(length) [1 unit = 3M ].
> Size: Option(c) 122CM x 5M(length) [1 unit = 5M ].
No cutting joint if order quantity above 5M length.
Example: order 10M then 10M continuous length in a single roll packing.
> Direction to use:
1- Surface must be clean and free from all dirt, dust, grease & oil.
2- Apply filler if surface found hole, crack, scratch or any damage.
3- Measure and cut the target surface size.
4- Tear off the release paper on the other side of the sticker and slowly attach on the target surface.
5- Using a scraper to remove the bubble in order the sticker is fully attached with flat surface.
6- Using a trimmer or cutter to trim the extra film on the edge to get your target size.
7- Do leave it at least 12hr upon installation completed.
Note:
1- Pls allow 3-5mm tolerance due to manual measurement.
2- Colour may vary different from the actual picture.
×
×